What Is Mold Inspection? How Do Mold Inspectors Perform This Test?

What is Mold Inspection?

Mold inspection is the process of looking for growing molds either in an apartment or building. Mold inspection is very much important to save the residential area from further damage and also the residents from getting breathe related diseases like sinus and asthma. There are many factors regarding mold inspection that you have to know before you start mold inspection or call some expert for the same.

In the blog below, there is mention of theimportance of mold inspection and how the mold inspectors perform this whole test.

The Importance of Mold Inspection

There are many reasons that prove why mold inspection is a must. Some of the points are as below:

  1. To determine the extent of mold development
  2. To determine the cause of growing mold
  3. To prevent the residential area from further damage
  4. To ensure the sources of moisture

33

How do Mold Inspectors perform this Test?

In mold inspection process, there are tests to ensure that all the sources of moisture in the house or building are not open in any manner. If you are considering calling the expert mold inspectors, then Houston mold inspectors are highly recommendable.

 The well trained Houston mold inspectors perform their test in the following manner:

  1. Air Samples

There are many ways to take and analyze the air samples. Spore trap sampling is the most popular among them.

  • The spore trap already has a volume of air pass that draws its impact on a sticky surface when it passes through the spore ambush sampling apparatus.
  • Almost all the particles in the air draw their impact on the sticky surface and get confine to the sultry surface.
  • When this spore trap is taken to the laboratory for a further inspection, the experts and technicians at the laboratory apply some stains to that sultry surface that the mold spores are capable of absorbing.
  • Finally, the identification and quantification of the mold spores are done during the sampling process.
  • The other methods include culturing and growing the mold spores.

33

  1. Surface Samples

There are various methods of analyzing the surface samples. Some of the methods are as below:

  • Bulk Sample: A small part of the sampling area is physically kept aside and then taken to the laboratory for further inspection.
  • Swab sample: The experts rub a cotton swab across the sampling area, and then that portion is taken to the laboratory for further analysis.
  • Tape sample: The experts press a small piece of tape on the sampling area and then remove a part from the sampling area to take it to the laboratory for further inspection.

After the inspection of mold samples at the laboratory, it is necessary to analyze these mold samples carefully.

It is very important to have mold inspection in the residential areas, both for the area and the people living there. Also, it is important to know about each, and every detail about mold examination before one starts doing it or calls an expert mold inspector for the same.