If you are thinking about wanting to install an Air conditioning in your home or workplace, this list would help you consider what aspects to consider before you choose a device and fitting company. If you take these into account, you will probably choose the right one.
A device with the right performance at the right place
The undersized, low-power device can’t cool down in high heat, it never stops, it consumes more, it gets worse sooner.
The oversized device is unreasonably expensive, more space-consuming, more power-consuming (from the power grid), may be louder, may cause too much airflow in the room (heavily blowing), installation may be more expensive. For the Air Conditioning Repair this is a very important detail.
Air conditioning devices usually consist of two parts, one outdoor unit and one indoor unit. When installing the indoor unit, care should be taken not to let the appliance cool directly to anyone, the entire room to be cooled through, the airflow should not be disturbing and technically feasible (connection to the outdoor unit, drainage of condensate from the indoor unit in the indoor unit, electric Wiring).
Quality device – higher price
The more expensive devices are given a longer warranty, which the manufacturer can do with better quality parts, more elaborate designs. These devices can have better parameters: power consumption, noise level, cooling power, more auxiliary functions, more beautiful design. The brand and service network of branded devices is also more reliable. Replacing an irreparable device is a very expensive thing! It should be taken into account that when repairing the air conditioners (under warranty or not), who pays for any equipment and equipment, transport, replacement of parts, commissioning. These fees may be higher than the cost of the repaired component.
Simple and extra-functional devices
The air conditioners can be two in terms of operation. It is the adjustable or fixed compressor performance. On / off type Air conditioning keeps a set temperature in the chilled room to switch the device’s maximum power (and therefore its consumption and noise) on and off. This is a cheaper and easier solution. The inverter devices can electronically control the compressor’s rotation and thus its performance. These Air conditionings can operate more economically and quietly, but are 20-40% more expensive.
Most air conditioners can work in heating mode. This means that the indoor unit is approx. 3 times more heat is injected into the air-conditioned room than if the current consumed by the appliance was consumed by a simple heat radiator (electric radiator). This optimally approaches the efficiency of gas heating. However, this mode is approx. + 3-5 ºC, can be used with inverter devices at -25-15 ºC outside temperature. (So it’s not very cold in winter, or it’s just bad.) Possible mode of drying is when the air humidity is reduced only by the air without significant cooling. The cooling temperature range, blowing strength and direction setting and programming options of the devices vary by type.